Many workers are unclear about the difference between edge banding hot melt adhesives when using them. To enable everyone to use glue better, I will explain to you the difference between the softening point temperature and the use temperature of edge banding hot melt adhesive:
It is often used in printing and packaging factories such as gift box factories, mobile phone box packaging factories, and book factories, and is very popular among manufacturers. Based on our daily experience in using glue, I would like to share with you how to use jelly glue and the precautions for its use:
Many manufacturers do not operate in a standardized manner, resulting in pitting on the surface of the products after vacuum blister products are blistered.Next, I will share with you the main reasons and solutions for pitting on the surface of vacuum plastic products.
In actual applications, due to the different bonding rates of machines of various manufacturers, the requirements for glue will also be different. Generally, it can be divided into high-rate, medium-rate, and low-rate jelly glue. Below, from the perspective of the application range of glue, I will share with you the differences between high-rate, medium-rate, and low-rate jelly glue:
Door factories, solid wood furniture factories, handicraft factories, display cabinet factories, picture frame factories, etc. All use assembly glue. Next, I will share with you some precautions for using wood assembly glue:
Through our long-term experience serving customers, the cracking problem after using laminated board glue is also a common problem for manufacturers. Below, we will share with you the main reasons for cracking when using laminated board glue:
He used a machine to bond boards and veneers. After the workers applied veneer glue and pressed them together through the machine, the product began to crack and bubble. He asked us the reasons and solutions for this situation. Based on our experience, we have summarized the following five reasons and shared them with you. We hope that it will be helpful to you.
In the process of serving customers, some customers asked us whether the quality of the adhesive would be affected if the glue was not completely used in one use. We answered that it could be used repeatedly, but some protective measures should be taken.
Many factories do not pay attention to some details of gluing during actual use, resulting in the situation that the splicing glue does not dry or dries slowly. Next, I will share with you the reasons and solutions for the splicing glue not drying or drying slowly:
many manufacturers are not particularly clear about the board parameters and requirements before edge banding. Below, we will share with you what requirements for boards before using edge-banding hot melt adhesive:
One of China Top 5 Adhesive Factory, Free Samples Available.
Phone and wechat: +86 137 0239 0495
Email: sales@bluerhino-adhesive.com
We will contact you within 1 working day, please pay attention to the email with the suffix —“sales@bluerhino-adhesive.com”.