Wood splicing glue is an adhesive used to glue the edges of multiple pieces of wood together to form a larger piece of wood. Furniture manufacturers choose wood splicing instead of raw wood, mainly because raw wood is expensive and easy to deform. As a Chinese manufacturer with more than 10 years of experience in the production and application of wood splicing glue, the following will share with furniture manufacturers and glue traders how to choose wood splicing glue from multiple perspectives:

Through years of experience in handling customer complaints on-site, as long as the initial test of the glue can be successfully passed, most of the cracking problems of the board when the factory uses it later are caused by the factory’s carelessness in the use of glue on site. Next, I will share with you the reasons for the cracking of the glue in the board:

The addition ratio and activity period of the hardener are crucial to the final board. Next, I will share with you the importance of the ratio of hardener and activation period of solid wood laminate adhesive.

Through our long-term experience serving customers, the cracking problem after using laminated board glue is also a common problem for manufacturers. Below, we will share with you the main reasons for cracking when using laminated board glue:

Many factories do not pay attention to some details of gluing during actual use, resulting in the situation that the splicing glue does not dry or dries slowly. Next, I will share with you the reasons and solutions for the splicing glue not drying or drying slowly:

The purpose of pressurizing the board is to allow the glue to better penetrate the board and form glue nails to ensure that the boards using panel glue can achieve the adhesive effect.Below, we will explain the matters that need to be paid attention to before, during, and after pressurizing the panels:

what is solid wood laminate splicing glue. Why is solid wood laminate splicing glue water-resistant? Then let’s find out, what are the Japanese JAS boiling water immersion peel test standards. What kind of results can meet the JAS test standards?

why the wood is so prone to cracking after using glue to join the wood if the drying and storage time is insufficient before splicing. This is mainly due to the internal stress inside the wood.

We have always recommended that the ambient humidity is 40-60% as the optimal ambient humidity for solid wood laminating. However, if you need to perform a lamination process when the humidity in the air is high, we recommend that furniture manufacturers use solid wood laminated adhesive when splicing. The following needs to be done: